FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Acid Inhibitor & Fume suppressant:
The job that is required to be galvanized has to be cleaned and surface rust removed. To remove the surface scales rust or dust, it is always dipped in a caustic and/or acid bath. The main objective of acid cleaning is to remove rust but not the metal. With plain acid, the rust does get dissolved but the acid also penetrates the metal surface and we call it corrosion.
To minimize corrosion, we need to use acid inhibitors. Acid inhibitor allows rust and scales to dissolve but is not so hard on the metal. This helps in reducing the use of acid and the accompanying problems with its usage.
Our combination Acid Inhibitor & Fume Suppressant allows the pickle tank to be run at a lower temperature, enough to remove rust and scales but prevents Iron from dissolving in to the tank. This helps in reducing the use of acid and the accompanying problems with its disposal. Our Acid inhibitor & Fume Suppressant can be used in any acid and for any surface like wire, pipe, rod, bar, sheet, sections or fabricated jobs. Operating at a lower temperature will not only save on utility costs but will also introducing lower amount of Iron in to the tank whereby reducing the amount of dross formed, thereby improving Zinc usage.
The Fume Suppressant part of the additive lets you keep your plant free from noxious acid fumes, improving HSE compliance.
Our inhibitor is used from 0.2 to 0.5% of the acid content.
Flux enhancer is designed to allow a better bond between the iron and zinc. Since it also reduces the amount of Iron introduced in to the flux tank, it will reduce dross formation.
By adding flux-enhancer, the concentration of flux can be reduced. Addition of flux enhancer will improve the adhesion of flux on the wetted job and reduce the dross formation.
The amount of flux-enhancer required in zinc ammonium chloride pre-flux tank is 1% to 2% of the flux.
Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)