Finoric LLC

Acid Corrosion Inhibitor

Acid Corrosion Inhibitor Supplier Manufacturers' Represantative for Fracturing

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

There are several types of Corrosion Inhibitors. The ones that are commonly used in fracturing are I-124 for high temperature up to 350F. Another is I-123 which is free from propargyl alcohol and used for medium temperature up to 250F.

I-123: Acid Corrosion Inhibitor

Use:
I-123 is a cost effective acid corrosion inhibitor for use in acidizing.  It is compatible with all strengths of HCl and Mud acids and has special additives to ensure it doesn’t interfere with emulsified acids. 

I-123 is formulated without Propargyl Alcohol and is designed to form a protective film on metal surfaces for use in acidizing treatments and spearheads in fracturing treatments up to formation temperatures of 250 F.  For higher temperatures increased dosage may be required or user could switch to I-124 or add an intensifier to the acid system.

Physical & Chemical Properties:

Parameter Specification
Density 8.5 to 9 lb/gal
Solubility in Water Soluble
Solubility in Diesel Insoluble
Appearance Dark colored liquid
Odor Alcohol/Glycol/Aromatic
Flash point 185°F
Freeze point < 20°F

Compatibility: Compatible with most known acidizing fluids and additives used in acidizing treatments.  However, a compatibility test is recommended before use

Environment: I-123 is hazardous to the environment. 

Typical Dosage: Pumped at 0.5 to 4 gpt with acid fluids to provide effective corrosion inhibition.

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance.  It has been effectively used up to BHT of 300 deg F.  It is recommended to use an intensifier at BHT above 250 deg F or switch to I-124.

Packaging: 330 ga one way totes, 275 ga one way totes, 55 ga drums and bulk tank trucks

Availability: Pleasanton, TX; Beasley, TX and Midland, TX

DOT Classification: Regulated

I-124: Acid Corrosion Inhibitor

Use:
I-124 is a cost effective acid corrosion inhibitor for use in acidizing.  It is compatible with all strengths of HCl and Mud acids and has special additives to ensure it doesn’t interfere with emulsified acids. 

I-124 is formulated without Propargyl Alcohol and is designed to form a protective film on metal surfaces for use in acidizing treatments and spearheads in fracturing treatments up to formation temperatures of 350 F. 

I-124 is a blend of Haloalkyl Heteropolycycle Salts and shows excellent inhibition rates against HCl, HF, and mixtures thereof in L80, N80, P110, 13Cr95, etc. 

Physical & Chemical Properties:

Parameter Specification
Density 8.5 to 9 lb/gal
Solubility in Water Soluble
Solubility in Diesel Insoluble
Appearance Dark colored liquid
Odor Alcohol/Glycol/Aromatic
Flash point 185°F
Freeze point < 20°F

Compatibility: Compatible with most known acidizing fluids and additives used in acidizing treatments.  However, a compatibility test is recommended before use

Environment: I-124 is hazardous to the environment. 

Typical Dosage: Pumped at up to 40 gpt with acid fluids to provide effective corrosion inhibition.

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance.  It has been effectively used up to BHT of 350 deg F. 

Packaging: 330 ga one way totes

Availability: Pleasanton, TX; Beasley, TX and Midland, TX

DOT Classification: Regulated


Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC