Finoric LLC

Aluminum Chloride

Aluminum Chloride Anhydrous Hexahydrate Manufacturers' Representative, USP BP Ph Eur Grade

CAS number: Aluminum chloride hexahydrate 7784-13-6
Molecular Weight: 241.43
Chemical Formula: AlCl3·6H2O

CAS number: Aluminum chloride anhydrous 7446-70-0,
Molecular Weight: 134.34
Chemical Formula: AlCl3

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

Aluminum Chloride Anhydrous or Anhydrous Aluminum Chloride

Specifications of Anhydrous Aluminum Chloride or Aluminum Chloride Anhydrous
Aluminum Chloride Anhydrous Our Guaranteed
Assay, percent by mass, min 98.5%
Insoluble matter, percent by mass, max 0.4%
pH of 5% solution 3-4.5
Particle Size 0-2 mm for Powder and 2-10 mm for Crystals
Color Yellowish-Grey-Greenish
Odor Hydrochloric Acid Odor

Packing: In 25 HDPE bags with liners or 50 kg MS or HDPE drums with liners. Packing can be given as desired by the buyer.

Aluminum Chloride Hexahydrate
Aluminum Chloride Hexahydrate Grade 1
AlCl3-6H2O --- 241.43
Aluminum chloride, hexahydrate.
Aluminum chloride hexahydrate [7784-13-6].
Aluminum Chloride contains not less than 95.0 percent and not more than 102.0 percent of AlCl3, calculated on the anhydrous basis. The average COA is 98%.
Water: between 42.0% and 48.0%.
Sulfate: The addition of 0.2 mL of barium chloride TS to 10 mL of a solution (1 in 100) produces no turbidity within 1 minute.
Limit of alkalies and alkaline earths: To a boiling solution of 1.0 g in 150 mL of water add a few drops of methyl red TS, then add 6 N ammonium hydroxide until the color of the solution just changes to a distinct yellow. Add hot water to restore the volume to 150 mL, and filter while hot.
Evaporate 75 mL of the filtrate to dryness, and ignite to constant weight: the weight of the residue does not exceed 2.5 mg (0.5%).
Heavy metals, Method :  the limit is 0.002%.
Iron — 0.001%.

Aluminum Chloride USP Grade Specifications

Formula: AlCl3·6H2O
Weight: 241.43
CAS No: [7784-13-6].
Aluminum Chloride contains not less than 95.0 percent and not more than 102.0 percent of AlCl3, calculated on the anhydrous basis.

Identification: A solution (1 in 10) responds to the tests for Aluminum and for Chloride.
Water: Between 42.0% and 48.0%.
Sulfate: The addition of 0.2 mL of barium chloride to 10 mL of a solution (1 in 100) produces no turbidity within 1 minute.
Limit of alkalies and alkaline earths: the limit is 0.5%.
Heavy metals: the limit is 0.002%.
Iron: the limit is 0.001%.

Aluminium Chloride Hexahydrate BP Grade Ph Eur Grade Specifications
Formula: AlCl3,6H2O
Weight: 241.4
CAS No: 7784-13-6

DEFINITION
Content: 95.0 per cent to 101.0 per cent.

CHARACTERS
Appearance: White or slightly yellow, crystalline powder or colourless crystals, deliquescent.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent), soluble in glycerol.

IDENTIFICATION
A. Dilute 0.1 ml of solution S2 (see Tests) to 2 ml with water. The solution gives reaction of chlorides.
B. Dilute 0.3 ml of solution S2 to 2 ml with water. The solution gives the reaction of aluminium.

TESTS
Solution S1: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Solution S2: Dilute 50 ml of solution S1 to 100 ml with water.
Appearance of solution: Solution S2 is clear and not more intensely coloured than reference solution.
Sulphates: Maximum 100 ppm, determined on solution S1.
Iron: Maximum 10 ppm, determined on solution S1.
Alkali and alkaline-earth metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.
Water: 42.0 per cent to 48.0 per cent, determined on 50.0 mg.

Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC