CAS number: 120-51-4
Chemical Formula: C14H12O2
FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.
Specifications of Benzyl Benzoate USP Grade:
Benzoic acid, phenylmethyl ester.
Benzyl benzoate --- CAS number 20-51-4
Benzyl Benzoate contains not less than 99.0 percent and not more than 100.5 percent of C14H12O2.
Packaging and storage: Preserve in tight, well-filled, light-resistant containers, and avoid exposure to excessive heat.
Specific gravity: between 1.116 and 1.120.
Congealing temperature: not lower than 18C. Congelation may be brought about by addition of a fragment of previously congealed Benzyl Benzoate when the temperature has reached the expected congealing temperature.
Refractive index: between 1.568 and 1.570 at 20 .
Aldehyde: Transfer 10.0 g to a 125-mL conical flask containing 50 mL of alcohol and 5 mL of hydroxylamine hydrochloride solution (3.5 in 100), mix, and allow to stand for 10 minutes. Add 1 mL of bromophenol blue and titrate with 0.1 N sodium hydroxide to a light green endpoint. Perform a blank determination and match the color of the endpoint with that of the titrated test solution. The net volume of 0.1 N sodium hydroxide consumed does not exceed 0.50 mL (0.05% as benzaldehyde).
Acidity: Add 2 drops of PhPh to 25 mL of alcohol and add 0.020 N sodium hydroxide until a pink color is produced. Add 5.0 g of Benzyl Benzoate, mix, and titrate with 0.020 N sodium hydroxide: not more than 1.5 mL of 0.020 N sodium hydroxide is required to restore the pink color.
Assay: Transfer about 2 g of Benzyl Benzoate, accurately weighed, to a conical flask fitted with a reflux condenser, add 50.0 mL of 0.5 N alcoholic potassium hydroxide and boil gently for 1 hour. Cool, add PhPh and titrate with 0.5 N hydrochloric acid. Perform a blank determination. Each mL of 0.5 N alcoholic potassium hydroxide is equivalent to 106.1 mg of C14H12O2.
Benzyl Benzoate BP Grade
CAS number: 120-51-4
Content: 99.0 per cent to 100.5 per cent.
Appearance: Colourless or almost colourless crystals or colourless or almost colourless, oily liquid.
Solubility: Practically insoluble in water, miscible with ethanol (96 per cent), with methylene chloride and with fatty and essential oils.
First identification A.
Second identification B, C.
A. Infrared absorption spectrophotometry. Comparison Ph. Eur. reference spectrum of benzyl benzoate.
B. To 2 g add 25 ml of alcoholic potassium hydroxide solution and boil under a reflux condenser for 2 h. Remove the ethanol on a water-bath, add 50 ml of water and distill. Collect about 25 ml of distillate and use it for identification test C. Acidify the liquid remaining in the distillation flask with dilute hydrochloric acid. A white precipitate is formed that, when washed with water and dried in vacuum melts at 121C to 124C.
C. To the distillate obtained in identification test B add 2.5 g of potassium permanganate and 5 ml of dilute sodium hydroxide solution. Boil under a reflux condenser for 15 min, cool and filter. Acidify the filtrate with dilute hydrochloric acid. A white precipitate is formed that, when washed with water and dried in vacuum, melts at 121C to 124C.
Acidity: Dissolve 2.0 g in ethanol (96 per cent) R and dilute to 10 ml with the same solvent. Titrate with 0.1 M sodium hydroxide using PhPh solution R as indicator. Not more than 0.2 ml is required to change the colour of the indicator to pink.
Relative density: 1.118 to 1.122.
Refractive index: 1.568 to 1.570.
Freezing point: Minimum 17C.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
ASSAY: To 2.000 g add 50.0 ml of 0.5 M alcoholic potassium hydroxide and boil gently under a reflux condenser for 1 h. Titrate the hot solution with 0.5 M hydrochloric acid using 1 ml of PhPh solution as indicator. Carry out a blank determination. 1 ml of 0.5 M alcoholic potassium hydroxide is equivalent to 106.1 mg of C14H12O2.
Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)