Finoric LLC

Cross Linker for Guar, Boron and Zirconium based

4BBG-XL4, Cross linker Boron & Zirconium Based(Uncoated and Encapsulated) for fracturing fracking or frac fluids, Suppliers Manufacturer and Manufacturer's Representative

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

BBG-XL-4
4% Boron, pH Buffered, Borate based liquid, Green Cross Linker. It is a green, glycol-free solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.

DESCRIPTION
BBG-XL-4 high Boron content buffered liquid Cross linker.  It is a green, glycol-free solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.
BBG-XL-4 offers convenience and flexibility in the creation & use of high viscosity cross linked gels which potentially increase fracture width and allow higher proppant loading.
BBG-XL-4 can be added on the fly, typical loading rates are 1 to 3 gpt based on fluid properties desired.

TYPICAL PHYSICAL PROPERTIES

Parameter Specification
Appearance Clear Liquid
Odor None
Boron Content 4%
Specific Gravity 1.3 to 1.4
pH 11 to 13
Pour Point 20 deg F

Compatibility: Compatible with most known fracturing fluids additives used in all types of guar and guar derivatives. However, a compatibility test is recommended before use.

Environment: Not hazardous to the environment.

Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result.

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.

Packaging: 330 ga one way totes, 275 ga one way totes, 55 ga drums and Bulk Tank Trucks

Availability: Pleasanton, TX; Beasley, TX and Midland, TX

DoT Classification: Regulated


CX-10
4% Boron, Non-Buffered, Instant, Borate based, Cross Linker

Use: CX-10 is a high Boron content non-buffered liquid Cross Linker. It is a solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.

CX-10 offers convenience and flexibility in the creation & use of high viscosity cross linked gels which potentially increase fracture width and allow higher proppant loading.

CX-10 can be added on the fly, typical loading rates are 1 to 3 gpt based on desired fluid properties.

CX-10 should be used with a delayed buffer to reduce pumping horsepower requirements.

Physical & Chemical Properties:
Appearance: Clear Liquid
Odor: Glycol
Boron Content: 4% min
Specific Gravity: 1.1 to 1.20
pH: 4 to 9
Pour Point: 10 deg F

Compatibility: Compatible with most known fracturing fluids additives for use with all types of guar and guar derivatives. A compatibility test is always recommended before use.

Environment: Not hazardous to the environment.

Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.

Packaging: 330 ga one way totes, 275 ga one way totes, 55 ga drums and Bulk Tank Trucks

Availability: Pleasanton, TX; Beasley, TX and Midland, TX

DoT Classification: Not Regulated in totes, Regulated in bulk


CX-14
4% Boron, Delayed, Borate based, Cross Linker

Use: CX-14 is a high Boron content delayed liquid Cross Linker. It is a solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.

CX-14 is a suspension of slowly dissolving Boron particles and gives a typical cross linking delay of 0.5 to 5 minutes, depending on loading and other conditions.

CX-14 can be winterized to extremely low pour-points for use in colder environments

CX-14 can be added on the fly, typical loading rates are 1 to 3 gpt based on desired fluid properties.

CX-14 should be used with a buffer to reduce pumping horsepower requirements.

Pysical Chemical Properties:
Appearance: Tan Liquid
Odor: Slight
Boron Content: 4% min
Specific Gravity: 1.35 to 1.45
pH: 4 to 9
Pour Point: 20 deg F

Compatibility: Compatible with most known fracturing fluids additives for use with all types of guar and guar derivatives. A compatibility test is always recommended before use.

Environment: Not hazardous to the environment.

Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.

Packaging: 330 ga one way totes, 275 ga one way totes, 55 ga drums and Bulk Tank Trucks

Availability: Pleasanton, TX; Beasley, TX and Midland, TX

DoT Classification: Not Regulated


Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC