Finoric LLC

Ferric Chloride

Hydrous Choline Chloride USP BP Ph Eur Supplier, Manufacturer's Representative, CAS Number 94-36-0

CAS number : 10025-77-1
Chemical Formula: FeCl3-6H2O

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

Ferric Chloride Hexahydrate BP Grade Ph Eur
Formula: FeCl3-6H2O
Weight: 270.3
CAS Number: 10025-77-1

DEFINITION
Content: 98.0 per cent to 102.0 percent.

CHARACTERS
Appearance: Crystalline mass or orange-yellow or brownish-yellow crystals, very hygroscopic.
Solubility: Very soluble in water and in ethanol (96 per cent), freely soluble in glycerol.

IDENTIFICATION
A. It gives reaction of chlorides.
B. It gives reaction of iron.

TESTS
Solution S: Dissolve 10 g in distilled water and dilute to 100 ml with the same solvent.
Acidity: In a suitable polyethylene container, dissolve 3.0 g of potassium fluoride in 15 ml of water. Titrate with 0.1 M sodium hydroxide using 0.1 ml of PhPh solution as indicator until a pink colour is obtained. Add 10 ml of solution S and allow to stand for 3 h. Filter and use 12.5 ml of the filtrate. Not more than 0.30 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to pink.
Free chlorine: Heat 5 ml of solution S. The vapour does not turn starch iodide paper blue.
Sulphates: Maximum 100 ppm.
Ferrous ions: Maximum 50 ppm.
Heavy metals: Maximum 50 ppm.

Ferric Chloride Hexahydrate Analytical Reagent Grade
Iron(III) Chloride Hexahydrate
Formula: FeCl3-6H2O
Weight: 270.30
CAS Number: 10025-77-1

REQUIREMENTS
Assay: 97.0-102.0% FeCl3 . 6H2O

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Nitrate (NO3): 0.01%
Phosphorus compounds (as PO4): 0.01%
Sulfate (SO4): 0.01%
Copper (Cu): 0.03%
Zinc (Zn): 0.03%
Ferrous iron (Fe++): Passes test
Substances not precipitated by ammonium hydroxide (as sulfates): 0.1%

Specifications of Ferric Chloride Anhydrous:
Appearance: Greenish to Black, Crystalline powder
FeCl3 Assay: 98 %
Ferrous Salt as FeCl2: 0.10 % max
Insolubles: 0.50 % max.
Specific Gravity@25°C: 2.80
Molecular weight: 162.5
Melting Point: 282°C
Solubility: miscible in water.


Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC