Finoric LLC

Potassium Sorbate

Potassium Sorbate USP FCC Food Grade BP Ph Eur Supplier, Manufacturer's Representative

CAS number: 24634-61-5 or 590-00-1

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

Potassium Sorbate USP
C6H7KO2 -- 150.22
2,4-Hexadienoic acid, (E,E)-, potassium salt; 2,4-Hexadienoic acid, potassium salt.
Potassium (E,E)-sorbate; Potassium sorbate CAS Number 590-00-1 & 24634-61-5.

Potassium Sorbate contains not less than 98.0 percent and not more than 101.0 percent of C6H7KO2, calculated on the dried basis.

Identification:
A: Dissolve 1 g in 10 mL of water: the solution responds to the test for Potassium.
B: Dissolve 0.2 g in 2 mL of water, and add a few drops of bromine TS: the color is discharged.
Acidity or alkalinity: Dissolve 1.1 g in 20 mL of water, and add PhPh TS. If the solution is colorless, titrate with 0.10 N sodium hydroxide to a pink color that persists for 15 seconds: not more than 1.1 mL is required. If the solution is pink in color, titrate with 0.10 N hydrochloric acid: not more than 0.80 mL is required to discharge the pink color.
Loss on drying: Dry it at 105C for 3 hours: it loses not more than 1.0% of its weight.
Heavy metals: 0.001%.
Assay: Dissolve about 300 mg of Potassium Sorbate, accurately weighed, in 40 mL of glacial acetic acid, warming, if necessary, to effect solution. Cool to room temperature, add 1 drop of crystal violet TS, and titrate with 0.1 N perchloric acid VS to a blue-green endpoint. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N perchloric acid is equivalent to 15.02 mg of C6H7KO2.

Potassium Sorbate FCC Food Grade
2,4-Hexadienoic Acid, Potassium Salt
CH3CH CHCH CHCOOK
C6H7KO2 Formula wt 150.22
CAS Number 590-00-1

DESCRIPTION
Potassium Sorbate occurs as white to off white crystals, crystalline powder, or pellets. It decomposes at about 270C. Function: Antimicrobial agent; preservative.

REQUIREMENTS
Identification:
A. A 1:10 aqueous solution responds to the flame test for Potassium.
B. Add a few drops of bromine TS to 2 mL of a 1:10 solution. The color disappears.
Assay: Not less than 98.0% and not more than 101.0% of C6H7KO2, calculated on the dried basis.
Acidity (as sorbic acid): Passes test (about 1%).
Alkalinity (as K2CO3): Passes test (about 1%).
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 1.0%.

Potassium Sorbate BP Ph Eur
Formula: C6H7KO2
Weight: 150.2
CAS Number: 590-00-1
Action and use: Antimicrobial preservative.

DEFINITION
Potassium (E,E)-hexa-2,4-dienoate.
Content: 99.0 per cent to 101.0 per cent (dried substance).

CHARACTERS
Appearance: White or almost white powder or granules.
Solubility: Very soluble in water, slightly soluble in ethanol (96 per cent).

IDENTIFICATION
First identification: B, D.
Second identification: A, C, D.
A. Ultraviolet and visible absorption spectrophotometry.
Test solution: Dissolve 50.0 mg in water R and dilute to 250.0 ml with the same solvent.
Dilute 2.0 ml of this solution to 200.0 ml with 0.1 M hydrochloric acid.
Spectral range: 230-350 nm.
Absorption maximum: At 264 nm.
Specific absorbance at the absorption maximum: 1650 to 1900.
B. Infrared absorption spectrophotometry.
Comparison potassium sorbate CRS.
C. Dissolve 1.0 g in 50 ml of water R, add 10 ml of dilute hydrochloric acid R and shake.
Filter the crystalline precipitate, wash with water R and dry in vacuum over sulphuric acid R for 4 h. The residue obtained melts at 132C to 136C.
D.Dissolve 0.2 g in 2 ml of water R and add 2 ml of dilute acetic acid R. Filter. The solution gives reaction (b) of potassium.

TESTS
Solution S: Dissolve 2.5 g in carbon dioxide-free water R and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
Acidity or alkalinity: To 20 ml of solution S add 0.1 ml of PhPh solution R. Not more than 0.25 ml of 0.1M sodium hydroxide or 0.1 M hydrochloric acid is required to change the colour of the indicator.
Aldehydes: Maximum 0.15 per cent, expressed as C2H4O.
Dissolve 1.0 g in a mixture of 30 ml of water R and 50 ml of 2-propanol R, adjust to pH 4 with 1 M hydrochloric acid and dilute to 100 ml with water R. To 10 ml of the solution add 1 ml of decolorised fuchsin solution R and allow to stand for 30 min. Any colour in the solution is not more intense than that in a standard prepared at the same time by adding 1 ml of decolorised fuchsin solution R to a mixture of 1.5 ml of acetaldehyde standard solution (100 ppm C2H4O) R, 4 ml of 2-propanol R and 4.5 ml of water R.
Heavy metals: Maximum 10 ppm.
2.0 g complies with test D. Prepare the reference solution using 2 ml of lead standard solution (10 ppm Pb) R.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3 h.

Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC