Finoric LLC

Sodium Metabisulfite

Sodium Metabisulfite Supplier and Manufacturers' Representative

CAS number : 7681-57-4
Molecular Weight: 190.11
Chemical Formula: Na2S2O5

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

Specifications of Sodium Metabisulfite Pure grade
Assay as Na2S2O5 Not less than 97.0% Na2S2O5
Insoluble matter 0.005% max
Appearance White
Chloride (Cl) 0.05%
Thiosulfate (S2O3) 0.05%
Heavy metals (as Pb) 10 ppm
Iron (Fe) 50 ppm

Sodium Metabisulfite USP NF
Formula: Na2S2O5
Weight: 190.11
Disulfurous acid, disodium salt.
Disodium pyrosulfite [CAS Number 7681-57-4]

Sodium Metabisulfite contains an amount of Na2S2O5 equivalent to not less than 65.0 percent and not more than 67.4 percent of SO2.

Identification: A solution (1 in 20) responds to the tests for Sodium 191 and for Sulfite.
Limit of chloride: Dissolve 1.0 g in 10 mL of water, filter, if necessary, through a small chloride free filter, and add 6 mL of 30 percent hydrogen peroxide. Add 1 N sodium hydroxide until the solution is slightly alkaline to phenolphthalein, dilute with water to 100 mL, and mix. Dilute 2.0 mL of this solution with water to 20 mL, and add 1 mL of nitric acid and 1 mL of silver nitrate TS. Mix, allow to stand for 5 minutes protected from direct sunlight, and compare the turbidity, if any, with that produced from a 2-mL aliquot of a control (prepared by diluting 0.71 mL of 0.020 N hydrochloric acid to 100 mL) in an equal volume of total solution containing the quantities of reagents used in the test : any turbidity produced by the test specimen does not exceed that of the control preparation (0.05%).
Iron: the limit is 0.002%.
Limit of thiosulfate: Mix 2.2 g with 10 mL of 1 N hydrochloric acid in a 50-mL beaker. Boil gently for 5 minutes, cool, and transfer to a small test tube. Any turbidity is not greater than that produced by 0.10 mL of 0.10 N sodium thiosulfate, similarly treated (0.05%).
Heavy metals: the limit is 0.002%.

Sodium Metabisulfite FCC Food Grade
Sodium Pyrosulfite
Formula: Na2S2O5
Weight: 190.11
INS: 223
CAS: [CAS Number 7681-57-4]

DESCRIPTION
Sodium Metabisulfite occurs as colorless crystals or as a white to yellow, crystalline powder. It is freely soluble in water and slightly soluble in alcohol. Its solutions are acid to litmus.
Function: Preservative; antioxidant.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Sodium and for Sulfite.
Assay
: Not less than 90.0% and not more than 100.5% of Na2S2O5.
Iron: Not more than 10 mg/kg.
Lead: Not more than 2 mg/kg.
Selenium: Not more than 5 mg/kg.

Sodium Metabisulfite Analytical Reagent
Disodium Disulfite
Formula: Na2S2O5
Weight: 190.11
CAS Number: 7681-57-4

REQUIREMENTS
Assay: 97% Na2S2O5 minimum

MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.05%
Thiosulfate (S2O3): 0.05%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.002%.

Sodium Metabisulfite Uses
Reducing agents for the chemical, pharmaceutical, photographic, textile industries and as food additives.
Auxiliary for water and sewage treatment.
Bleach for the paper and pulp industry.
Auxiliary for the film and photographic industry.
Ensiling agent.
Preservative.

Sodium Metabisulfite Uses (Food)
Bleaching agent (e.g. candies, cake) loose agent (e.g. bread, cracker, etc).
Antiseptic and germicide (e.g. fruit juice, tinned food, etc).
Inhibitor and freshening agent (e.g. day lily, seafood, fruit and vegetable, etc).


Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC