Finoric LLC

Sodium Sulfide Nonahydrate

Sodium Sulfide Nonahydrate USP NF ACS Reagent Grade Supplier, Manufacturer's Representative

CAS number : 1313-84-4
Molecular Weight: 240.18
Chemical Formula: Na2S.9H2O

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

Sodium Sulfide USP Grade
Formula: Na2S.9H2O
Weight: 240.18
Sodium sulfide nonahydrate.
Disodium sulfide nonahydrate----[CAS Number 1313-84-4]

Sodium Sulfide contains not less than 98.0 percent and not more than 103.0 percent of Na2S.9H2O.

Identification: [NOTE—Conduct this test in a fume hood.] Transfer about 100 mg of Sodium Sulfide, to a suitable container, add 10 mL of 3 N hydrochloric acid, and cover the top of the container with filter paper saturated with a 0.2 M lead acetate solution: a brownish or silvery-black color forms on the paper.
Limit of iron: Dissolve about 5.0 g in 100 mL of water: the solution is clear and colorless.
Limit of sulfite and thiosulfate: Dissolve 3.0 g in 200.0 mL of filtered and degassed water. Add 100.0 mL of 0.2 N zinc sulfate, mix, and allow to stand for 30 minutes. Filter, add 1 mL of starch, and titrate 100.0 mL of the filtrate with 0.01 N iodine: not more than 3.0 mL is required.
Assay: Transfer about 275 mg of Sodium Sulfide, accurately weighed, to a 250-mL beaker, dissolve in 30 mL of filtered and degassed water, and mix. Add 50.0 mL of 0.1 N iodine while mixing, add 2 mL of hydrochloric acid, and allow to stand for 15 minutes in a dark place. Titrate with 0.1 N sodium thiosulfate VS to a pale yellow color. Add 5 mL of starch and titrate with 0.1 N sodium thiosulfate to a clear endpoint. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N sodium thiosulfate is equivalent to 12.01 mg of Na2S.9H2O.

Sodium Sulfide Nonahydrate ACS Reagent Grade
Formula: Na2S-9H2O
Weight: 240.18
CAS Number: 1313-84-4
NOTE: To enhance stability, storage below 10C is recommended.

REQUIREMENTS
Appearance: Crystals, colorless or with only a slight yellow color
Assay: 98.0% Na2S . 9H2O

MAXIMUM ALLOWABLE
Ammonium (NH4): 0.005%
Sulfite and thiosulfate (as SO4): 0.1%
Iron: Passes test.


Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC