Finoric LLC

Zinc Ammonium Chloride, Galvanizing Flux

Zinc Ammonium Chloride, Galvanizing Flux Powder Granules & Liquid Solution Supplier Manufacturers and Manufacturers' Representative

FInOrIC, etymologically derived from our business line of Fine Inorganic, Organic and Industrial Chemicals, is the internationally preferred source for Chemicals. With customers in 55 countries across 5 continents, we source and sell most chemicals. Backed by owned full fledged chemical manufacturing facilities in Midland & Houston Area Texas with associated manufacturing sites in India, Dubai, China and USA we are a truly multi-national chemical manufacturer & distributor. Fracturing and Fracking Industry can rely on our 24x7 - 365days service including week-end deliveries.

DESCRIPTION

Product Description

Type of Salt & Ammonium Chloride Number & Molecular Formula & Mol Wt. & Zinc Content CAS Number & EINECS
Zinc Ammonium Chloride Mono Salt A.C.N.=0.39 ZnCl2-NH4Cl & MW=189.80 & Zn 34.3% minimum 52628-25-8 & 258-054-8
Zinc Ammonium Chloride Double Salt A.C.N.=0.79 ZnCl2-(NH4Cl)2 & MW=243.30 & Zn 26.7% minimum 14639-97-5 & 238-687-6
Zinc Ammonium Chloride Triple Salt A.C.N.=1.18 ZnCl2-(NH4Cl)3 & MW=296.76 & Zn 21.9% minimum 14639-98-6 & 238-688-1
Zinc Ammonium Chloride Quad Salt A.C.N.=1.57 ZnCl2-(NH4Cl)4 & MW=350.25 & Zn 18.6% minimum --

Zinc Ammonium Chloride Salt is offered as powder or as liquid solution & granular chunks.

We also offer the following proprietary products of Zinc Ammonium Chloride Galvanizing Flux

Zinc Ammonium Chloride based Proprietary Galvanizing Flux in Powder form for Wet Flux applications
( LOW FUMING and COST EFFECTIVE ); Grade: AMIPM
Packed in 50 Kg HDPE bags

Zinc Ammonium Chloride based Proprietary Galvanizing Flux in Powder form for Dry Flux applications
( LOW FUMING and FAST DRYING ); Grade: AMILI
Packed in 50 Kg HDPE bags

Zinc Ammonium Chloride based Proprietary Galvanizing Flux as 20-25 Baume Liquid
( PIPE GALVANIZING ); Grade: AMILIPI
Packed in 200 Kg HDPE Barrels

AMIPM is a proprietary Galvanizing Flux based on Zinc Ammonium Chloride.  It is LOW COST formulation for reduced fuming and typically used for continuous galvanizing lines (or new flux charge in a batch process). AMIPM is the preferred multi-component, cost-effective formulation. Zinc Ammonium Chloride based Proprietary Galvanizing Flux is extensively used in continuous sheet galvanizing lines as it contains special additives that offer high luster to galvanized products without the typical Sulphide smell that other high luster fluxes bear.  Our Galvanizing Flux optimum melting point cleans the sheet before it enters the zinc bath, ensuring strong and uniform adhesion.

AMILI Zinc Ammonium Chloride Galvanizing Flux is formulated for high speed, low fuming, negligible ash and most importantly thin, strong and uniform Zinc coats. Use of our proprietary additives ensures that the flux dries to a simple film, which protects and seals the fluxed steel. Due to the improved fluxing action and a thinner lighter film, the flux dries up faster.  The dryer the article to be galvanized is, the quieter it enters the kettle, hence less zinc is splattered about.

The uniform film that is formed over the article to be galvanized due to our special additives, acts as a protective layer over the Iron, ensures that less iron is introduced into the kettle, reducing dross formation.

Most of our partners facilities of MANUFACTURE BULK DRUGS/API, EXCIPIENTS, PHARMACEUTICALS (IP/BP/USP/NF/PH. EUR./JP), SPECIALITY CHEMICALS (PURE/AR/ACS), MINERAL FORTIFIERS (FCC). OUR MANUFACTURING FACILITY IS GLP, GMP (FDA) APPROVED, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, KOSHER, HALAL, COPP AND WHO-GMP CERTIFIED.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)


Finoric LLC